Warwick Hanger

Hang it Faster

  • About Us
  • Our Products
    • New Products
    • Pipe Hangers
    • Copper Tubing
    • DWV / PVC
    • Black Iron
    • PEX
    • Hardware – Fasteners
    • Protective Plates
    • Strut
  • Catalog
  • Contact Us

Self-Fastening Shields

Posted on December 7, 2020 by warwickhanger - No Comments

Self-Fastening Shields

Designed for protection of foam, fiberglass, or high density insulation when used with pipe hangers.

Series: 1551 & 1552

Size: 1 1/2” – 12”

Material: Carbon Steel

Finish: Galvanized

 

Part #

10″

Part #

12″

Size

Tabs*

Packaged

1552-1.5

1551-1.5

1 1/2″

50

1552-2

1551-2

2″

YES

50

1552-2.5

1551-2.5

2 1/2″

50

1552-3

1551-3

3″

YES

50

1552-3.5

1551-3.5

3 1/2″

50

1552-4

1551-4

4″

YES

50

1552-5

1551-5

5″

YES

50

1552-6

1551-6

6″

YES

50

1552-8

1551-8

8″

50

1552-10

1551-10

10″

50

1552-12

1551-12

12″

50

Continue Reading

Domestic Ceiling Flanges

Posted on May 26, 2020 by warwickhanger - No Comments

Domestic Ceiling Flanges

Ceiling Flange Comparison Sheet

Our ceiling flanges are used in conjunction with threaded rod. The center hole accepts a piece of 3/8″  threaded rod allowing various types of pipe hangers to be threaded on the opposite end of the rod.

Series 2102 – Galvanized

Size Range: 3/8″-1/2″

Material: Malleable Iron

Part # Size Packaged
2102-C-G 3/8” 25

 

Series 2102 – Copper

Size Range: 3/8″-1/2″

Material: Malleable Iron

Part # Size Packaged
2102-C-C 3/8” 25

 

Continue Reading

Plastic Closed Clamp with Nail

Posted on January 24, 2019 by warwickhanger - No Comments

 

Series 176 Plastic Closed Clamp with Nail

Size Range: 1/2” and 3/4”
Finish: Black

Function: Secures copper, CPVC and PEX tubing.

Material: High Density Polyethylene

 

Part# Size Description Packaged
176-50 1/2” Plastic Closed Clamp with Nail 100
176-75 3/4” Plastic Closed Clamp with Nail 100
Continue Reading

Download our Catalog!

Posted on April 25, 2018 by warwickhanger - No Comments

2021 Warwick Hanger Catalog

Continue Reading

Labels

Posted on September 28, 2017 by warwickhanger - No Comments

Customize your labels! We print what you need! 

STEP ONE: CHOOSE YOUR TEXT

We offer many different labels to fit your requirements. If your desired label is not pictured below, shoot us an email request at sales@warwickhanger.com

NO MINIMUM ORDER

SET UP FEE: $25

100+ LABELS – NO SET UP FEE

Spec Sheet

STEP TWO: CHOOSE YOUR SIZE

(1) 3.25” x 17.75”
(1A) 2.25” X 12”
(1B) 2.25” X 8.25”

STEP THREE: CHOOSE YOUR QUANTITY

25 50 75 100
Continue Reading

Suspension Bracket and Insulators

Posted on August 30, 2017 by warwickhanger - No Comments

Suspension Bracket

 

-Works with PEX, CPVC, and Copper tubing

-Includes two 111/32” holes

-Use with Warwick Hanger Pipe Insulators

-Use 3/8” all-thread rod

Part Number Finish Packaged
826-1 Galvanized 25

Pipe Insulators

-Fits 111/32” holes in brackets or metal studs

-Opening in Insulator has offset hole for easy modification of tube positioning

-Works with PEX, CPVC, and Copper tubing

 

Red

Part Number

Insulator

Hole

Packaged
827-50-R ½” 50
827-75-R ¾” 50
827-10-R 1” 50

Blue

Part Number

Insulator

Hole

Packaged
827-50-B ½” 50
827-75-B ¾” 50
827-10-B 1” 50
Continue Reading

Domestic Split Rings

Posted on August 30, 2017 by warwickhanger - No Comments

SPEC SHEET

MADE IN USA

This series of Split Ring Hangers

are specialized for use of suspending

or supporting CTS or IPS piping

from 3/8” threaded rod.

Galvanized
Part Number Size Rod Size Weight Packaged
2050-2 1/2” 3/8” .08 Lbs 25
2050-3 3/4” 3/8” .09 Lbs 25
2050-4 1” (N/A) (N/A) (N/A) (N/A)

 

Copper
Part Number Size Rod Size Weight Packaged
2150-2 1/2” (N/A) (N/A) (N/A) (N/A)
2150-3 3/4” 3/8” .08 Lbs 25
2150-4 1” 3/8” .09 Lbs 25
Continue Reading

Grip Right Device

Posted on August 30, 2017 by warwickhanger - No Comments

GRIP RIGHT DEVICE

-Grips pipes automatically

-Allows pipes to be moved and repositioned

-Holds pipe straight even with applied pressures from below

-Keeps pipe stub from falling through to next floor

-Works with ¼” underlayment and concrete board

-Stops banging pipes

-Eliminates need for Pex 90’s

-Works with ½” Copper, CPVC, and Pex water pipes

-Can be used as the escutcheon

Option 1

Push your water line stub (1/2” copper, cpvc, pex, 12”-24” long) into the Grip Right device. Drop the water line with the attached Grip Right device into a 1” diameter hole.

Option 2

Drop the Grip Right device into a hole without a pipe. Fasten the Grip Right Device to the floor. You can insert water line from the top or bottom knowing the pipe will be held true and straight.

Continue Reading

Copper Strut Clamps

Posted on April 24, 2017 by warwickhanger - No Comments

Strut

Series 650 Copper Plated Strut

Spec Sheet

Size Range: ½” – 4”
Material: Carbon Steel
Finish:
Copper Plating
Function:  The copper pipe clamps are designed for copper tubing and used at any point along the slot side of the channel strut.

Series 650 Copper Plated Strut Clamps
Part # Size Weight Packaged
650-2 1/2″ .07 Lbs 25
650-3 3/4″ .09 Lbs 25
650-4 1″ .11 Lbs 25
650-5 1 1/4″ .12 Lbs 25
650-6 1 1/2″ .17 Lbs 25
650-7 2″ .22 Lbs 25
650-8 2 1/2″ .42 Lbs 25
650-9 3″ .48 Lbs 25
650-10 3 1/2” .60 Lbs 25
650-11 4” .72 Lbs 25
Continue Reading

Galvanized Strut Clamps

Posted on April 24, 2017 by warwickhanger - No Comments

Series 600 Galvanized Strut Clamps

Spec Sheet

Size Range: 1/2″ – 8”
Material: Carbon Steel
Finish: Galvanized
Function:  Used at any point along the slot side of the channel and are inserted into the two channel returns

The galvanized pipe clamps are designed for electrical metallic tubing, intermediate metal conduit, rigid conduit and OD tubing for fastening of the piping for any industry.

Part # Size Weight Packaged
600-2 1/2″ .12 Lbs 25
600-3 3/4″ .13 Lbs 25
600-4 1″ .14 Lbs 25
600-5 1 1/4″ .19 Lbs 25
600-6 1 1/2″ .20 Lbs 25
600-7 2″ .30 Lbs 25
600-8 2 1/2″ .40 Lbs 25
600-9 3″ .57 Lbs 25
600-10 3 1/2” .67 Lbs 25
600-11 4” .79 Lbs 25
600-12 5” .94 Lbs 25
600-13 6” 1.24 Lbs 25
600-14 8” 1.41 Lbs 25
Continue Reading

Cushion Clamps

Posted on April 24, 2017 by warwickhanger - No Comments

Series 675 Cushion Clamps

Spec Sheet

Size Range: 3/16” – 6”
Material: Carbon Steel
Finish: Galvanized
Function: Used to absorb shock and vibration. Reduces unwanted noise and prevents galvanic corrosion.

Part # Size O.D. Size Weight Packaged
675-1 5/8″ 3/4″ .13 Lbs 25
675-2 3/16” 1/4″ .10 Lbs 25
675-3 1/4” 3/8″ .10 Lbs 25
675-4 3/8” 1/2″ .13 Lbs 25
675-5 1/2” 5/8″ .14 Lbs 25
675-6 3/4” 7/8” .15 Lbs 25
675-7 1” 1 1/8” .15 Lbs 25
675-8 1 1/4” 1 3/8” .17 Lbs 25
675-9 1 1/2” 1 5/8” .18 Lbs 25
675-10 2” 2 1/8” .20 Lbs 25
675-11 2 1/2” 2 5/8” .33 Lbs 10
675-12 3” 3 1/8” .60 Lbs 10
675-13 4” 4 1/8” .90 Lbs 10
675-14 5” 5 1/8” 1.3 Lbs 10
675-15 6” 6 1/8” 1.4 Lbs 10
Continue Reading

Strut Accessories

Posted on April 24, 2017 by warwickhanger - No Comments

Strut Hardware


Part # Description Finish Packaged
2012-A 1/4″ Warwick Hanger Spring Nut Plated 50
2012-C 3/8″ Warwick Hanger Spring Nut Plated 50
2012-D 1/2″ Warwick Hanger Spring Nut Plated 50
2012-E 5/8″ Spring Nut Plated 50
2012-F 3/4″ Spring Nut Plated 50
2013-A 1/4″ Springless Nut Plated 50
2013-C 3/8″ Springless Nut Plated 50
2013-D 1/2″ Springless Nut Plated 50
2013-E 5/8″ Springless Nut Plated 50
2013-F 3/4″ Springless Nut Plated 50
2400-8 4 X 3 Angle Bracket Plain 25
2400-9 4 1/2″ X 3 1/2″ Angle Bracket Plain 25
Continue Reading

Strut

Posted on April 24, 2017 by warwickhanger - No Comments

Series 690-691 Strut

Spec Sheet

Size Range: 5′ – 10′
Material: Carbon Steel
Finish: Plain
Function:  Strut is often used in conjunction with pipe hangers for vertical or horizontal support of pipe.  It is also used for mechanical structure and support of Industrial and Commercial HVAC units.

Series 650 Copper Plated Strut Clamps
Part # Size Guage Packaged
690-10 1 5/8″ X 13/16″ X 5′ 12 1
690-15 1 5/8″ X 1 5/8″ X 5′ 12 1
691-10 1 5/8″ X 13/16″ X 10′ 12 1
691-15 1 5/8″ X 1 5/8″ X 10′ 12 1
Continue Reading

Protective Plates

Posted on April 24, 2017 by warwickhanger - No Comments

Protective Plates

Spec Sheet

Size Range: 16 – 18 Gauge
Material: Galvanized or Plain Hardened Steel
Function: Used to protect pipes from nail punctures

700  + 750 – Self nailing points

715 + 725 – Nailing holes only

Part # Size Gauge Weight Packaged
700-3 1 1/2″ X 3″ 18 .05 Lbs 100
700-5 1 1/2″ X 5″ 18 .09 Lbs 100
700-6 1 1/2″ X 6″ 18 .11 Lbs 100
700-9 1 1/2″ X 9″ 18 .34 Lbs 25
700-18 1 1/2” X 18” 18 .68 Lbs 25
700-20 2 3/4” X 8 3/4” 16 .35 Lbs 25
700-22 1 1/2” X 22” 18 .74 Lbs 25
700-23 3 1/2” X 5 3/4” 16 .35 Lbs 25
700-28 1 1/2” X 28” 18 .83 Lbs 25
715-3 1 1/2″ X 3″ 16 .07 Lbs 100
715-5 1 1/2″ X 5″ 16 .12 Lbs 100
715-6 1 1/2″ X 6″ 16 .13 Lbs 100
725-3 1 1/2″ X 3″ 18 .05 Lbs 100
725-5 1 1/2″ X 5″ 18 .09 Lbs 100
725-6 1 1/2″ X 6″ 18 .11 Lbs 100
730-8 5″ X 8″ 16 .60 Lbs 25
750-3 1 1/2″ X 3″ 16 .07 Lbs 100
750-5 1 1/2″ X 5″ 16 .12 Lbs 100
750-6 1 1/2″ X 6″ 16 .13 Lbs 100
920-9 3” X 9” 18 .25 Lbs 25
920-18 3” X 18” 18 .35 Lbs 25
935-5 3 1/2″ X 5″ 16 .48 Lbs 25
935-6 3 1/2″ X 6″ 16 .51 Lbs 25
955-8 5″ X 8″ 16 .65 Lbs 25
955-16 5/16 5″ X 16 5/16″ 16 1.33 Lbs 25
Continue Reading

Steel C-Clamp

Posted on April 24, 2017 by warwickhanger - No Comments

Steel C-Clamp

Spec Sheet

Size Range: 3/8” thru 5/8” rod
Material:  Carbon Steel
Finish: Plain and Galvanized
Function: Used to attach I beams, channels, and wide flange beams where the thickness does not exceed 3/4”. Hardened set screw secures “C” clamp to beam.

Part # Size Rod Size Weight Packaged
2005-C-P 3/8″ 3/8″ .41 Lbs 25
2005-D-P 1/2″ 1/2″ .65 Lbs 25
2005-E-P 5/8” 5/8” .90 Lbs 25
2005-F-P 3/4″ 3/4 .98 Lbs 25
Continue Reading

Stainless Trap Covers

Posted on April 24, 2017 by warwickhanger - No Comments

Series 1500 Trap Covers

Material: Stainless Steel

Finish: Polished Stainless

Part # Description Material Weight Packaged
1500-1 Raised Stainless Steel .130 Lbs 25
1500-2 Flat Stainless Steel .185 Lbs 25
Continue Reading

Side Beam Connectors

Posted on April 24, 2017 by warwickhanger - No Comments

Side Beam Connectors

Spec Sheet

Size Range: 3/8” – ½”
Material: Malleable Iron
Finish: Plain
Function: Used to mount threaded rod.

Our Side Beam Connector is designed to mount onto a steel beam or joist and is used in conjunction with threaded rod. It has a threaded hole to accept 3/8 threaded rod allowing various types of pipe hangers to be threaded on to the opposite end of the rod.

Part # Size Rod Size Weight Packaged
2003-C 3/8″ 3/8″ .12 Lbs 25
2003-D 1/2″ ½” .17 Lbs 25
Continue Reading

Ceiling Flange

Posted on April 24, 2017 by warwickhanger - No Comments

Ceiling Flange

Spec Sheet

Size Range: 3/8 – ½ Threaded rod
Material: Malleable Iron
Finish: Plain, Galvanized and Copper
Function:  Used to mount threaded rod.

Our Ceiling Flanges are used in conjunction with threaded rod. The flanges can be mounted to most surfaces. The center hole accepts a piece of 3/8 threaded rod allowing various types of pipe hangers to be threaded on to the opposite end of the rod.

Part # Finish Rod Size Weight Packaged
2002-A-P Plain 1/4” .14 Lbs 25
2002-C-P Plain 3/8” .14 Lbs 25
2002-D-P Plain 1/2” .14 Lbs 25
2002-A-G Galvanized 1/4” .16 Lbs 25
2002-C-G Galvanized 3/8” .16 Lbs 25
2002-D-G Galvanized 1/2” .16 Lbs 25
2002-A-C Copper Plated 1/4” .16 Lbs 25
2002-C-C Copper Plated 3/8” .16 Lbs 25
2002-D-C Copper Plated 1/2” .16 Lbs 25
Continue Reading

Wall Dog

Posted on April 24, 2017 by warwickhanger - No Comments

Series 2130 and 2131 Wall Dog

Size Range: 3/16″ X 1 1/4” and 1/4” X 1 1/4”
Material: Carbon Steel
Finish: Galvanized
Function:   The Wall dog is an all steel, one piece, threaded fastener, which is used to fasten various fixtures directly to drywall.

Part # Size Description Packaged
2130-A 3/16″ X 1 1/4” Oval Head 100
2131-A 1/4” X 1 1/4” Pan Head 100
Continue Reading

Power Bolt Anchor

Posted on April 24, 2017 by warwickhanger - No Comments

Series 2121 Power Bolt

Size Range:  2 1/4” & 3”
Material: Carbon Steel

The Power-Bolt anchor, formerly known as the Rawl-Bolt, is a heavy duty sleeve style, selflocking anchor which is vibration resistant and removable. It is available with a finished hex head or flat head with a hex key insert and can be used in concrete, block, brick, or stone.  Expansion occurs at two locations within the drilled hole. First, the cone is pulled into the large triple-tined expansion sleeve, developing a mid-level, compression force. Further turning causes the threaded bolt to advance into the threads of the expander cone, forcing its four sections outward. This action undercuts the base material deep in the anchor hole, greatly increasing the holding power of the Power-Bolt. The bolt and cone remain locked together which prevents loosening under even the most severe vibratory conditions.  The Power-Bolt is also designed to draw the fixture into full bearing against the base material through the action of its flexible compression ring. As the anchor is being tightened, the compression ring will crush if necessary to tightly secure the fixture against the face of the base material.

Part # Size Packaged Case Quantity
2121-H 3/8” X 2 1/4” 25 N/A
2121-J 3/8” X 3” 25 N/A
Continue Reading

Power Stud Anchor

Posted on April 24, 2017 by warwickhanger - No Comments

Series 2122 Power Stud

Spec Sheet

Size Range:  2 1/4” & 3”
Material: Carbon Steel

The Power-Stud anchor, formerly known as the Rawl-Stud, is a fully threaded, torque controlled, wedge expansion anchor which is designed for consistent performance. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout-filled concrete masonry. The threaded version is produced in carbon steel and stainless steel to offer various levels of corrosion resistance depending on use.  The drill bit diameter necessary for prope installation is the same as the anchor diameter.

Part # Size Packaged Case Quantity
2122-H 3/8” X 2 1/4” 25 N/A
2122-J 3/8” X 3” 25 N/A
Continue Reading

Mechanical Anchors

Posted on April 24, 2017 by warwickhanger - No Comments

Mechanical Anchors

Spec Sheet


Part # Size Rod Size Packaged
2109-L Vertical Mount for Concrete 1 1/4″ 1/4″ 25
2109-B Wood Rod Vertical Mount 2″ 1/4″ 25
2112-A Wood Side Winder 2” 3/8″ 25
2112-B Wood Straight 2” 3/8″ 25
2112-C Concrete Side Winder W/ Drill Bit 1 1/.2” 3/8″ 25
2112-D Concrete Straight W/ Drill Bit 1 1/2”: 3/8″ 25
2112-E Wood Rod Vertical Mount 1” 3/8″ 25
2112-F Wood Rod Horizontal Mount 1” 3/8″ 25
2112-G Wood Straight 3” 3/8″ 25
2112-H Vertical Mount for Steel 1” 3/8″ 25
2112-I Vertical Mount for Steel 2” 3/8″ 25
2112-K Vertical Mount for Concrete 2 3/4″ 1/2″ 25
2112-M Vertical Mount for Steel 1 1/2″ 3/8″ 25
2112-P Vertical Mount for Wood 2 1/2″ 3/8″ 25
2112-R Nut Driver for Cement 3/8″ 3/8″ 1
2112-S Universal Nut Driver for Wood and Steel 3/8″ 1
2112-T Nut Driver for Cement 1/2″ 1/2″ 1
Continue Reading

Copper Nailing Hooks

Posted on April 24, 2017 by warwickhanger - No Comments

Copper Plated Nailing Hooks

Size Range: 3/8 – 1/2
Material: Carbon Steel
Finish: Copper Plating

Function: These Copper Nailing Hooks are designed to nail directly into Wooden joists. The provide quick installation of small diameter copper tuing.

Part # Finish Size Packaged Case Quantity
2113-C Copper Plated 3/8” 100 1000
2113-D Copper Plated 1/2” 100 1000
Continue Reading

Nylon Nailin

Posted on April 24, 2017 by warwickhanger - No Comments

Series 2117 Nylon Nailin

Size Range: 1/4” to 3”
Material: Carbon Steel

The Nylon Nailin is a nail drive anchor with a body formed from engineered plastic and drive nails available in carbon and stainless steel. The anchor can be used in concrete, block, brick or stone. The anchor is pre-assembled with either a carbon steel or stainless steel nail. This anchor is not recommended for applications overhead. For overhead applications, please refer to the Zamac Hammer-Screw.

Part # Size Packaged Case Quantity
2117-D 1/4″ X 1” 25 N/A
2117-F 1/4” X 1 1/2” 25 N/A
2117-G 1/4″ X 2” 25 N/A
Continue Reading

Top Beams

Posted on April 24, 2017 by warwickhanger - No Comments

Top Beams

Spec Sheet

Size Range: 3/8” – 1/2″
Material: Malleable Iron
Finish: Plain
Function: Used in conjunction with a wide variety of pipe hangers

Our Top Beam Clamp is designed to clamp onto a steel I beam and is used in conjunction with threaded rod. The clamp has a threaded hole to accept a piece of 3/8 threaded rod allowing various types of pipe hangers to be threaded on to the opposite end of the rod

Juniors

Part # Size Rod Size Weight Packaged
2004-C-P 3/8″ 3/8″ .30 Lbs 25
2004-D-P 1/2″ 1/2″ .35 Lbs 25

Seniors

Part # Size Rod Size Weight Packaged
2104-C-P 3/8″ 3/8″ .40 Lbs 25
2104-D-P 1/2″ 1/2″ .49 Lbs 25

Beam Clamp/Retaining Strap

Size Range: 4” – 24”
Material:
Function: Used to secure conduit to a metal beam, girder or similar structure, either directly or by means of a threaded rod.

Part # Size
2024-1 4″
2024-2 6”
2024-3 8″
2024-4 10″
2024-5 12″
2024-6 14″
2024-7 16″
2024-8 20”
2024-9 24”
Continue Reading

Lag End Driver

Posted on April 24, 2017 by warwickhanger - No Comments

Lag Ends and Lag End Drivers

Try Our New Lag End Driver*

Spec Sheet

You can drive lag ends with your hand drill in seconds. Eliminate the use of a ceiling flange and cut-to-length threaded rod.

Drive lag ends without harming the thread. Available for 3/8″ and 1/2″ lag ends. Save money on installation costs.

See the video. Download the brochure (PDF file, 268KB).

*Patent Pending

Part # Description Finish Size Packaged
2001-A-P Lag Ends Plain 3/8 x 3 1/2 25
2001-B-P Lag Ends Plain 3/8 x 4 25
2001-C-P Lag Ends Plain 3/8 x 4 1/2 25
2001-D-P Lag Ends Plain 3/8 x 6 25
2001-E-P Lag Ends Plain 3/8 x 8 25
2001-F-P Lag Ends Plain 3/8 x 12 25
2011-A-P Lag Ends Plain 1/2 x 3 1/2 25
2011-B-P Lag Ends Plain ½ x 4 25
2011-C-P Lag Ends Plain 1/2 x 4 1/2 25
2011-D-P Lag Ends Plain ½ x 6 25
2011-E-P Lag Ends Plain ½ x 8 25
2011-F-P Lag Ends Plain 1/2 x 12 25
2001-A-G Lag Ends Plated 3/8 x 3 1/2 25
2001-B-G Lag Ends Plated 3/8 x 4 25
2001-C-G Lag Ends Plated 3/8 x 4 1/2 25
2001-D-G Lag Ends Plated 3/8 x 6 25
2001-E-G Lag Ends Plated 3/8 x 8 25
2001-F-G Lag Ends Plated 3/8 x 12 25
2011-A-G Lag Ends Plated 1/2 x 3 1/2 25
2011-B-G Lag Ends Plated ½ x 4 25
2011-C-G Lag Ends Plated 1/2 x 4 1/2 25
2011-D-G Lag Ends Plated ½ x 6 25
2011-E-G Lag Ends Plated ½ x 8 25
2011-F-G Lag Ends Plated 1/2 x 12 25
2001-H Lag End Driver Plain 3/8” 1
2001-I Lag End Driver Plain 1/2″ 1

Continue Reading

Misc Hardware

Posted on April 24, 2017 by warwickhanger - No Comments

Threaded Rod

Spec Sheet

Part # Description Finish Size Packaged
2006-A-P Threaded Rod Plain 1/4 – 20 50
2006-B-P Threaded Rod Plain 5/16-18 35
2006-C-P Threaded Rod Plain 3/8 – 16 25
2006-D-P Threaded Rod Plain 1/2 – 13 13
2006-E-P Threaded Rod Plain 5/8 – 11 8
2006-F-P Threaded Rod Plain 3/4 – 10 5
2006-G-P Threaded Rod Plain 7/8 – 9 4
2006-H-P Threaded Rod Plain 1 – 8 2
2006-A-G Threaded Rod Zinc Plated 1/4 – 20 50
2006-B-G Threaded Rod Zinc Plated 5/16-18 35
2006-C-G Threaded Rod Zinc Plated 3/8 – 16 25
2006-D-G Threaded Rod Zinc Plated 1/2 – 13 13
2006-E-G Threaded Rod Zinc Plated 5/8 – 11 8
2006-F-G Threaded Rod Zinc Plated 3/4 – 10 5
2006-G-G Threaded Rod Zinc Plated 7/8 – 9 4
2006-H-G Threaded Rod Zinc Plated 1 – 8 2
2006-C-G-2 1/2″ Threaded Rod Stud Zinc Plated 3/8″ X 2 1/2″ 100
2006-C-P-1 1/2″ Threaded Rod Stud Plain 3/8″ X 1 1/2″ 100
2006-C-P-2″ Threaded Rod Stud Plain 3/8″ X 2″ 100
2006-C-P-2 1/2″ Threaded Rod Stud Plain 3/8″ X 2 1/2″ 100
2006-C-P-4″ Threaded Rod Stud Plain 3/8″ X 4″ 100
2006-C-P-6″ Threaded Rod Stud Plain 3/8″ X 6″ 100
2006-D-P-3/4″ Threaded Rod Stud Plain 1/2″ X 3/4″ 100
2006-D-P-2″ Threaded Rod Stud Plain 1/2″ X 2″ 100
2006-D-P-8″ Threaded Rod Stud Plain 1/2″ X 8″ 100

 

Washers

Spec Sheet

Part # Description Finish Size Packaged
2009-A-P Washer Plain ¼ 100
2009-B-P Washer Plain 5/16 100
2009-C-P Washer Plain 3/8 100
2009-D-P Washer Plain ½ 100
2009-E-P Washer Plain 5/8 100
2009-F-P Washer Plain ¾ 100
2009-G-P Washer Plain 7/8 100
2009-H-P Washer Plain 1 100
2009-A-G Washer Zinc Plated ¼ 100
2009-B-G Washer Zinc Plated 5/16 100
2009-C-G Washer Zinc Plated 3/8 100
2009-D-G Washer Zinc Plated ½ 100
2009-E-G Washer Zinc Plated 5/8 100
2009-F-G Washer Zinc Plated ¾ 100
2009-G-G Washer Zinc Plated 7/8 100
2009-H-G Washer Zinc Plated 1 100

 

Heavy Hex Nut

Spec Sheet

Part # Description Finish Size Packaged
2007-B-P Heavy Hex Nut Plain 5/16-18 100
2007-C-P Heavy Hex Nut Plain 3/8 – 16 100
2007-D-P Heavy Hex Nut Plain 1/2 – 13 100
2007-E-P Heavy Hex Nut Plain 5/8 – 11 100
2007-F-P Heavy Hex Nut Plain 3/4 – 10 100
2007-G-P Heavy Hex Nut Plain 7/8 – 9 100
2007-H-P Heavy Hex Nut Plain 1 – 8 100
2007-A-G Heavy Hex Nut Zinc Plated 1/4 – 20 100
2007-B-G Heavy Hex Nut Zinc Plated 5/16-18 100
2007-C-G Heavy Hex Nut Zinc Plated 3/8 – 16 100
2007-D-G Heavy Hex Nut Zinc Plated 1/2 – 13 100
2007-E-G Heavy Hex Nut Zinc Plated 5/8 – 11 100
2007-F-G Heavy Hex Nut Zinc Plated 3/4 – 10 100
2007-G-G Heavy Hex Nut Zinc Plated 7/8 – 9 100
2007-H-G Heavy Hex Nut Zinc Plated 1 – 8 100

 

Rod Couplings

Spec Sheet

Part # Description Finish Size Packaged
2110-A-G Rod Couplings Plated 1/4 – 20 50
2110-B-G Rod Couplings Plated 5/16 -18 50
2110-C-G Rod Couplings Plated 3/8 – 16 50
2110-D-G Rod Couplings Plated 1/2 – 13 50
2110-E-G Rod Couplings Plated 5/8 – 11 50
2110-F-G Rod Couplings Plated 3/4”- 10 50
2110-G-G Rod Couplings Plated 7/8 – 9 50
2110-H-G Rod Couplings Plated 1 – 8 50
2010-A-G Coupling Reducers Plated 1/4 to 3/8 50
2010-D-G Coupling Reducers Plated 3/8 to 1/2 50

 

Lag Screws

Part # Description Finish Size Packaged
2111-A-P Lag Screws Plain 3/8 x 4 25
2111-B-P Lag Screws Plain 3/8 x 6 25
2111-C-P Lag Screws Plain 3/8 x 8 25
2111-D-P Lag Screws Plain 3/8 x 12 25
2111-A-G Lag Screws Plated 3/8 x 4 25
2111-B-G Lag Screws Plated 3/8 x 6 25
2111-C-G Lag Screws Plated 3/8 x 8 25
2111-D-G Lag Screws Plated 3/8 X 12 25

 

Heavy Hex Bolt

Part # Description Finish Packaged
2128-A-P 5/8” X 1” Heavy Hex Bolt Plain 25
2128-B-P 5/8” X 1 1/4” Heavy Hex Bolt Plain 25
2128-C-P 5/8” X 1 1/2” Heavy Hex Bolt Plain 25
2128-D-P 5/8” X 2” Heavy Hex Bolt Plain 25
2128-E-P 5/8” X 2 1/4” Heavy Hex Bolt Plain 25
2128-F-P 5/8” X 2 1/2” Heavy Hex Bolt Plain 25
2128-G-P 5/8” X 3” Heavy Hex Bolt Plain 25
2128-A-G 5/8” X 1” Heavy Hex Bolt Galvanized 25
2128-B-G 5/8” X 1 1/4” Heavy Hex Bolt Galvanized 25
2128-C-G 5/8” X 1 1/2” Heavy Hex Bolt Galvanized 25
2128-D-G 5/8” X 2” Heavy Hex Bolt Galvanized 25
2128-E-G 5/8” X 2 1/4” Heavy Hex Bolt Galvanized 25
2128-F-G 5/8” X 2 1/2” Heavy Hex Bolt Galvanized 25
2128-G-G 5/8” X 3” Heavy Hex Bolt Galvanized 1.96

 

Drive Screw

Part # Description Finish Packaged
2115-E #12 X 1 ½” Drive Screw Plain 100
2115-F #12 X 2” Drive Screw Plain 100

 

Mushroom Drive Pin

Part # Description Finish Packaged
2116-A 1/4” x 3/4” Mushroom Drive Pin Zinc 100
2116-B 1/4” x 1” Mushroom Drive Pin Zinc 100
2116-C 1/4” x 1 1/4” Mushroom Drive Pin Zinc 100
2116-D 1/4” x 1 1/2” Mushroom Drive Pin Zinc 100
2116-E 1/4” x 2” Mushroom Drive Pin Zinc 100

 

Fender Washers

Part # Description Finish Packaged
2014-A 1/4” x 1 1/4 Fender Washers Zinc 100
2014-B 5/16” x 1 1/4 Fender Washers Zinc 100
2014-C 3/8” x 1 1/4 Fender Washers Zinc 100

 

Drop In Anchor

Spec Sheet

Part # Description Finish Packaged
2300-C 3/8” Drop In Anchor Plain 50
2300-D 1/2” Drop In Anchor Plain 50
Continue Reading

Stud Protector

Posted on April 24, 2017 by warwickhanger - No Comments

Series 700 Stud Protectors

Spec Sheet

Size Range: Single And Double Stud Protection.
Material: Carbon Steel
Finish: White Enamel

Part # Size Gauge
700-50 Single Stud Protector 18
700-51 Double Stud Protector 18
Continue Reading

The Sled

Posted on April 21, 2017 by warwickhanger - No Comments

Changing the way you work with radiant heating

The Sled is an easy-to-use, labor saving tool that eliminates alignment issues and the need for return panels. It is a router guide system that enables the operator to cut return bends directly into grooved radiant flooring panels. 

  • Return panels are no longer necessary
  • Eliminate headaches from puzzle piece layouts
  • Any crew member is now capable of laying out your most complex room with ease
  • Flexibility to create any configuration
  • Pays for itself on the very first job.

Download the brochure

Continue Reading

Glide Lock Pipe Clip

Posted on April 21, 2017 by warwickhanger - No Comments

Series 190 Glide Lock Pipe Clips

Size Range: 3/8” to 1”
Material:
Function: The Glide Lock Pipe Clip allows the pipe to glide back and forth freely while pipe is mounted to easily achieve your installation needs.  Then with a simple squeeze of the locking fingers your pipe is locked securely in place.

Part # Size Packaged Case Quantity
190-38 3/8″ 100 1000
190-50 1/2″ 100 1000
190-75 3/4” 100 1000
190-10 1″ 100 1000
Continue Reading

Pex Organizer

Posted on April 21, 2017 by warwickhanger - No Comments

The Pex Organizer

When it comes to installing Pex tubing, the Pex Organizer* gives you a clear and simple way to identify the specific use of the tube and communicate that use instantly or for future reference on the job site. Simply insert the same numbered peg into each end of the tube then describe the use next to the corresponding number on the provided reference sheet. The Pex organizer is a neat and professional way to relay information to everyone involved. When you are ready to make your Pex connections extract the peg which can then be attached to the tube using the peg clip. When your job is completed the Pex Organizer provides you and the homeowner with a complete labeled pex plumbing system.

Get the professional and easy to use Pex Organizer.  Available at your participating wholesaler. Download the brochure.

*Patent Pending

Part # Size Color Packaged
195-C-B 3/8″ Blue 1
195-C-R 3/8″ Red 1
195-D-B 1/2″ Blue 1
195-D-R 1/2″ Red 1
Continue Reading

Plastic Clips for Pex

Posted on April 21, 2017 by warwickhanger - No Comments

Plastic Clips for Copper, CPVC & Pex

Spec Sheet

Series 150/160 Plastic Pipe Clips

Size Range: 1/2″ – 1”
Finish: Black
Function: Secures copper, CPVC and PEX to both wood and metal framework.

Part # Size Description Packaged Case Quantity
150-50 1/2” Standard 100 1000
150-75 3/4” Standard 100 1000
150-10 1” Standard 100 1000
150-12 1 1/4″ Standard 100 1000
150-15 1 1/2″ Standard 100 1000
150-20 2″ Standard 100 1000
160-50 1/2” Suspension 100 1000
160-75 3/4” Suspension 100 1000
160-10 1” Suspension 100 1000
160-12 1 1/4″ Suspension 100 1000
160-15 1 1/2″ Suspension 100 1000
160-20 2″ Suspension 100 1000
Continue Reading

J Clips for FostaPex

Posted on April 21, 2017 by warwickhanger - No Comments

Series 175 Plastic J Clip with Nail for FostaPex

Size Range: 1/2” – 1”
Finish: Grey

Function: Secures FostaPex

Part # Size Description Packaged Case Quantity
175-50 1/2” J Clip With Nail 100 1000
175-75 3/4” J Clip With Nail 100 1000
175-10 1” J Clip With Nail 100 1000
Continue Reading

Bend Support

Posted on April 21, 2017 by warwickhanger - No Comments

Series 185 Bend Support

Size Range: 1/2” and 3/4”
Finish: Grey

Function: Plastic Bend Supports provide rigid 90 degree bends for pex tubing.  The Bend Supports are made of glass reinforced nylon.

Part # Size Description Packaged Weight
185-50 1/2” Bend Supports 25 .04 Lbs
185-75 3/4” Bend Supports 25 .16 Lbs.

Series 187 Metal Bend Support

Size Range: 1/2” and 3/4”
Finish: Galvanized

Function: Metal Bend Supports provide rigid 90 degree bends for pex tubing.

Part# Size Description Packaged
187-50 1/2 Bend Support 25
187-75 3/4 Bend Support 25
Continue Reading

Split Ring Hangers

Posted on April 21, 2017 by warwickhanger - No Comments

Series 2000 Galvanized Split Ring Hangers

Spec Sheet

Size Range: 3/8” – 4”
Material: Malleable Iron
Finish: Galvanized
Function: For suspending non-insulated stationary pipe lines

Our Galvanized Split Ring Hangers are used to suspend black iron pipe from joists, steel beams, wooden rafters or walls. They can be used in both horizontal and vertical applications.

Part # Size Rod Size Weight Packaged
2000-1 3/8″ 3/8″ .12 Lbs 25
2000-2 1/2″ 3/8″ .12 Lbs 25
2000-3 3/4″ 3/8″ .13 Lbs 25
2000-4 1″ 3/8″ .14 Lbs 25
2000-5 1 1/4″ 3/8″ .19 Lbs 25
2000-6 1 1/2″ 3/8″ .20 Lbs 25
2000-7 2″ 3/8″ .30 Lbs 25
2000-8 2 1/2″ 1/2″ .40 Lbs 25
2000-9 3″ 1/2″ .57 Lbs 25
2000-10 4″ 1/2″ .67 Lbs 25

 

Series 2200 Black Split Ring Hangers

Size Range: 3/8″ – 4”
Material: Malleable Iron
Finish: Plain
Function: For suspending non-insulated stationary pipe lines

Our Black Split Ring Hangers are used to suspend copper tubing from joists, steel beams, wooden rafters or walls. They can be used in both horizontal and vertical applications.

Standard packaging 25 PCs per box

Part # Size Rod Size Weight Packaged
2200-1 3/8″ 3/8″ .08 Lbs 25
2200-2 1/2″ 3/8″ .10 Lbs 25
2200-3 3/4″ 3/8″ .11 Lbs 25
2200-4 1″ 3/8″ .19 Lbs 25
2200-5 1 1/4″ 3/8″ .23 Lbs 25
2200-6 1 1/2″ 3/8″ .25 Lbs 25
2200-7 2″ 3/8″ .30 Lbs 25
2200-8 2 1/2″ 1/2″ .45 Lbs 25
2200-9 3″ 1/2″ .49 Lbs 25
2200-10 4″ 1/2″ .61 Lbs 25

 

Series 2100 Copper Plated Split Ring Hangers

Spec Sheet

Size Range: 3/8” – 4”
Material: Malleable Iron
Finish: Copper Plated
Function: For suspending non-insulated stationary pipe lines

Our Copper Plated Split Ring Hangers are used to suspend copper tubing from joists, steel beams, wooden rafters or walls. They can be used in both horizontal and vertical applications.

Part # Size Rod Size Weight Packaged
2100-1 3/8″ 3/8″ .07 Lbs 25
2100-2 1/2″ 3/8″ .07 Lbs 25
2100-3 3/4″ 3/8″ .09 Lbs 25
2100-4 1″ 3/8″ .11 Lbs 25
2100-5 1 1/4″ 3/8″ .12 Lbs 25
2100-6 1 1/2″ 3/8″ .17 Lbs 25
2100-7 2″ 3/8″ .22 Lbs 25
2100-8 2 1/2″ 1/2″ .42 Lbs 25
2100-9 3″ 1/2″ .48 Lbs 25
2100-10 4″ 1/2″ .60 Lbs 25

 

Series 2200 Black Split Ring Hangers

Size Range: 3/8″ – 4”
Material: Malleable Iron
Finish: Plain
Function: For suspending non-insulated stationary pipe lines

Our Black Split Ring Hangers are used to suspend copper tubing from joists, steel beams, wooden rafters or walls. They can be used in both horizontal and vertical applications.

Standard packaging 25 PCs per box

Part # Size Rod Size Weight Packaged
2200-1 3/8″ 3/8″ .08 Lbs 25
2200-2 1/2″ 3/8″ .10 Lbs 25
2200-3 3/4″ 3/8″ .11 Lbs 25
2200-4 1″ 3/8″ .19 Lbs 25
2200-5 1 1/4″ 3/8″ .23 Lbs 25
2200-6 1 1/2″ 3/8″ .25 Lbs 25
2200-7 2″ 3/8″ .30 Lbs 25
2200-8 2 1/2″ 1/2″ .45 Lbs 25
2200-9 3″ 1/2″ .49 Lbs 25
2200-10 4″ 1/2″ .61 Lbs 25
Continue Reading

Clevis Hangers

Posted on April 21, 2017 by warwickhanger - No Comments

Clevis Hangers for Iron Pipe

Spec Sheet

Series 2700 Carbon Steel Clevis Hangers

Size Range: 1/2” – 12”
Material: Carbon steel
Finish: Plain
Function: Used to suspend non-insulated stationary black iron pipe from steel beams.

Our Clevis Hanger is used in conjunction with threaded rod to achieve various heights. It allows the pipe to feed through the U portion of the hanger. Used in horizontal pipe runs.

Part # Size Rod Size Weight Packaged
2700-1 1/2″ 3/8″ .35 Lbs 25
2700-2 3/4″ 3/8″ .36 Lbs 25
2700-3 1″ 3/8″ .39 Lbs 25
2700-4 1 1/4″ 3/8″ .41 Lbs 25
2700-5 1 1/2″ 3/8″ .45 Lbs 25
2700-6 2″ 3/8″ .52 Lbs 25
2700-7 2 1/2″ 3/8″ 1.10 Lbs 25
2700-8 3″ 3/8″ 1.50 Lbs 25
2700-9 3 1/2″ 3/8″ 1.59 Lbs 25
2700-10 4” 1/2” 1.90 Lbs 25
2700-11 5” 1/2” 2.40 Lbs 5
2700-12 6″ 3/4″ 3.10 Lbs 5
2700-13 8” 3/4″ 4.37 Lbs 5
2700-14 10” 3/4″” 7.82 Lbs 5
2700-15 12” 7/8″ 10.38 Lbs 5

 

Series 2750 Copper Painted Clevis Hangers

Spec Sheet

Size Range: 1/2” thru 4”
Material: Carbon Steel
Finish: Copper Plating
Function: Used to suspend non-insulated stationary copper pipe from steel beams.

Our Clevis Hanger is used in conjunction with threaded rod to achieve various heights. It allows the pipe to feed through the U portion of the hanger. Used in horizontal pipe runs.

Part # Size Rod Size Weight Packaged
2755-1 1/2” 3/8″ .26 Lbs 25
2755-2 3/4” 3/8″ .28 Lbs 25
2755-3 1” 3/8″ .30 Lbs 25
2755-4 1 1/4” 3/8″ .33 Lbs 25
2755-5 1 1/2” 3/8″ .35 Lbs 25
2755-6 2” 3/8″ .41 Lbs 25
2755-7 2 1/2″ 1/2″ .70 Lbs 10
2755-8 3” 1/2” .91 Lbs 10
2755-10 4” 1/2” 1.05 Lbs 10
Continue Reading

Cushion Clamps

Posted on April 21, 2017 by warwickhanger - No Comments

Series 675 Cushion Clamps

Spec Sheet

Size Range: 3/16” – 6”
Material: Carbon Steel
Finish: Galvanized
Function: Used to absorb shock and vibration. Reduces unwanted noise and prevents galvanic corrosion.

Part # Size O.D. Size Weight Packaged
675-1 5/8″ 3/4″ .13 Lbs 25
675-2 3/16” 1/4″ .10 Lbs 25
675-3 1/4” 3/8″ .10 Lbs 25
675-4 3/8” 1/2″ .13 Lbs 25
675-5 1/2” 5/8″ .14 Lbs 25
675-6 3/4” 7/8” .15 Lbs 25
675-7 1” 1 1/8” .15 Lbs 25
675-8 1 1/4” 1 3/8” .17 Lbs 25
675-9 1 1/2” 1 5/8” .18 Lbs 25
675-10 2” 2 1/8” .20 Lbs 25
675-11 2 1/2” 2 5/8” .33 Lbs 10
675-12 3” 3 1/8” .60 Lbs 10
675-13 4” 4 1/8” .90 Lbs 10
675-14 5” 5 1/8” 1.3 Lbs 10
675-15 6” 6 1/8” 1.4 Lbs 10
Continue Reading

Strut Clamps

Posted on April 21, 2017 by warwickhanger - No Comments

Series 600 Galvanized Strut Clamps

Spec Sheet

Size Range: 1/2″ – 8”
Material: Carbon Steel
Finish: Galvanized
Function:  Used at any point along the slot side of the channel and are inserted into the two channel returns

The galvanized pipe clamps are designed for electrical metallic tubing, intermediate metal conduit, rigid conduit and OD tubing for fastening of the piping for any industry.

Part # Size Weight Packaged
600-2 1/2″ .12 Lbs 25
600-3 3/4″ .13 Lbs 25
600-4 1″ .14 Lbs 25
600-5 1 1/4″ .19 Lbs 25
600-6 1 1/2″ .20 Lbs 25
600-7 2″ .30 Lbs 25
600-8 2 1/2″ .40 Lbs 25
600-9 3″ .57 Lbs 25
600-10 3 1/2” .67 Lbs 25
600-11 4” .79 Lbs 25
600-12 5” .94 Lbs 25
600-13 6” 1.24 Lbs 25
600-14 8” 1.41 Lbs 25

 

Series 650 Copper Plated Strut Clamps

Spec Sheet

Size Range: ½” – 4”
Material: Carbon Steel
Finish: Copper Plating
Function:  Used at any point along the slot side of the channel and are inserted into the two channel returns

The copper  pipe clamps are designed for electrical metallic tubing, intermediate metal conduit, rigid conduit and OD tubing for fastening of the piping for any industry.

 

Part # Size Weight Packaged
650-2 1/2″ .07 Lbs 25
650-3 3/4″ .09 Lbs 25
650-4 1″ .11 Lbs 25
650-5 1 1/4″ .12 Lbs 25
650-6 1 1/2″ .17 Lbs 25
650-7 2″ .22 Lbs 25
650-8 2 1/2″ .42 Lbs 25
650-9 3″ .48 Lbs 25
650-10 3 1/2” .60 Lbs 25
650-11 4” .72 Lbs 25
Continue Reading

Swivel Hangers

Posted on April 21, 2017 by warwickhanger - No Comments

Series 2900 Galvanized Swivel Hangers

Spec Sheet

Size Range: 1/2″ – 8”
Material: Carbon Steel
Finish: Galvanized
Function: Used for the suspension of both non-insulated and insulated piping.

Our Galvanized Swivel Hanger is used for general piping purposes. Knurled swivel nut design permits hanger adjustment after installation. Spring tension on swivel nut holds it securely in hanger before installation. Swivel nut easily removed.

Part # Size Finish Weight Knurl Nut Size Packaged
2900-1 1/2” Galvanized .15 Lbs 3/8” 25
2900-2 3/4” Galvanized .15 Lbs 3/8” 25
2900-3 1” Galvanized .16 Lbs 3/8” 25
2900-4 1 1/4” Galvanized .18 Lbs 3/8” 25
2900-5 1 1/2” Galvanized .20 Lbs 3/8” 25
2900-6 2” Galvanized .22 Lbs 3/8” 25
2900-7 2 1/2 Galvanized .37 Lbs 3/8” 25
2900-8 3” Galvanized .44 Lbs 3/8” 25
2900-9 3 1/2” Galvanized .51 Lbs 3/8” 25
2900-10 4” Galvanized .56 Lbs 3/8” 25
2900-11 5” Galvanized .97 Lbs 1/2″ 25
2900-12 6” Galvanized 1.10 Lbs 1/2″ 25
2900-13 8” Galvanized 1.38 Lbs 1/2″ 25

 

Series 2950 Copper Plated Swivel Hanger

Spec Sheet

Size Range: 1/2” – 4”
Material: Carbon steel
Finish: Copper plated
Function: Used for the suspension of non-insulated stationary copper tubing.

 

Our Copper Plated Swivel Hanger is used for general piping purposes. Knurled swivel nut design permits hanger adjustment after installation. Spring tension on swivel nut holds it securely in hanger before installation. Swivel nut easily removed.

 

Part # Size Finish Weight Knurl Nut Size Packaged
2950-1 1/2” Copper Plated .15 Lbs 3/8” 25
2950-2 3/4” Copper Plated .15 Lbs 3/8” 25
2950-3 1” Copper Plated .16 Lbs 3/8” 25
2950-4 1 1/4” Copper Plated .18 Lbs 3/8” 25
2950-5 1 1/2” Copper Plated .20 Lbs 3/8” 25
2950-6 2” Copper Plated .22 Lbs 3/8” 25
2950-7 2 1/2″ Copper Plated .28 Lbs 3/8” 25
2950-8 3” Copper Plated .30 Lbs 3/8” 25
2950-10 4” Copper Plated .33 Lbs 5/8” 25
Continue Reading

Pipe Hangers

Posted on April 21, 2017 by warwickhanger - No Comments

Series 250 & 275 Black Iron Pipe Hangers

Size Range: 1/2″ – 1 1/4″
Material: Carbon Steel
Finish: Galvanized and Plastic Coated
Function: Used to support black iron pipes

Our Black Iron Pipe Hanger is similar to our Natick Hanger. It is a great substitute for black wire pipe hooks and split ring hangers.

Nails are Supplied with hangers.

Manufactured At Our Rhode Island Facility.

Part # Size Finish
250-1 1/2 x 6 Galvanized
250-2 3/4 x 6 Galvanized
250-3 1 x 6 Galvanized
250-4 1 1/4 x 6 Galvanized
275-1 1/2 x 6 Plastic Coated
275-2 3/4 x 6 Plastic Coated
275-3 1 x 6 Plastic Coated
275-4 1 1/4 x 6 Plastic Coated
Continue Reading

Riser Clamps

Posted on April 21, 2017 by warwickhanger - No Comments

Series 2800 Riser Clamps

Spec Sheet

Size Range: 1/2″ thru 12”
Material: Carbon Steel
Finish: Plain
Function: Used for supporting black iron piping through floors.

Our Riser Clamp is used for the support of steel or cast iron pipe lines where extreme load conditions exist. The Riser Clamp utilizes the structure to support the legs on each end of clamp, normally rests on the floor through which the riser passes.

Part # Size Material Weight Packaged
2800-1 1/2” Riser Carbon Steel 1.44 Lbs 25
2800-2 3/4” Riser Carbon Steel 1.44 Lbs 25
2800-3 1” Riser Carbon Steel 1.47 Lbs 25
2800-4 1 1/4” Riser Carbon Steel 1.50 Lbs 25
2800-5 1 1/2” Riser Carbon Steel 1.55 Lbs 25
2800-6 2” Riser Carbon Steel 1.69 Lbs 10
2800-7 2 1/2” Riser Carbon Steel 2.20 Lbs 10
2800-8 3” Riser Carbon Steel 2.50 Lbs 10
2800-9 3 1/2” Riser Carbon Steel 2.63 Lbs 10
2800-10 4” Riser Carbon Steel 3.49 Lbs 10
2800-11 5” Riser Carbon Steel 3.90 Lbs 5
2800-12 6” Riser Carbon Steel 5.55 Lbs 5
2800-13 8” Riser Carbon Steel 7.80 Lbs 5
2800-14 10” Riser Carbon Steel 9.72 Lbs 5
2800-15 12” Riser Carbon Steel 12.60 Lbs 5

 

Series 2855 Copper Painted Riser Clamps

Spec Sheet

Size Range: 1/2″ thru 4”
Material: Carbon Steel
Finish: Copper Plating
Function: Used for supporting copper tubing through floors.

Our Riser Clamp is used for the support of copper tubing. The Riser Clamp utilizes the structure to support the legs on each end of clamp, normally rests on the floor through which the riser passes.

Part # Size Material Weight Packaged
2855-1 1/2” Riser Carbon Steel 1.44 Lbs 25
2855-2 3/4” Riser Carbon Steel 1.44 Lbs 25
2855-3 1” Riser Carbon Steel 1.47 Lbs 25
2855-4 1 1/4” Riser Carbon Steel 1.50 Lbs 25
2855-5 1 1/2” Riser Carbon Steel 1.55 Lbs 25
2855-6 2” Riser Carbon Steel 1.69 Lbs 10
2855-7 2 1/2” Riser Carbon Steel 2.20 Lbs 10
2855-8 3” Riser Carbon Steel 2.50 Lbs 10
2855-10 4” Riser Carbon Steel 3.49 Lbs 10

 

Series 2825 & 2875 Short Arm Riser Clamps

Size Range: 11/2″ thru 4”
Material: Carbon Steel
Finish: Plain And Plastic Coated
Function: Used for supporting black iron piping through floors.

Our Riser Clamp is used for the support of PVC or ABS pipe lines where extreme load conditions exist. The Riser Clamp utilizes the structure to support the legs on each end of clamp, normally rests on the floor through which the riser passes.

Part # Size Material Weight Packaged
2825-5 1 1/2” Black Carbon Steel .52 Lbs 25
2825-6 2” Black Carbon Steel .55 Lbs 10
2825-8 3” Black Carbon Steel .72 Lbs 10
2825-10 4” Black Carbon Steel .89 Lbs 10
2875-5 1 1/2” Plastic Coated Carbon Steel .58 Lbs 10
2875-6 2” Plastic Coated Carbon Steel .65 Lbs 10
2875-8 3” Plastic Coated Carbon Steel .85 Lbs 10
2875-10 4” Plastic Coated Carbon Steel 1.01 Lbs 10
Continue Reading

Double Bolt Clamps

Posted on April 21, 2017 by warwickhanger - No Comments

Series 2840 Double Bolt Clamps

Size Range: 3″ thru 6”
Material: Carbon Steel
Finish: Plain
Function: Recommended for the suspension of heavy duty high temperature pipe runs.  This design allows flexibility of clamp installation.

Part # Size Material Weight Packaged
2840-8 3” Riser Carbon Steel 10
2840-10 4” Riser Carbon Steel 10
2840-12 6” Riser Carbon Steel 5
Continue Reading

Pipe Shields

Posted on April 21, 2017 by warwickhanger - No Comments

Series 1551 & 1552 Pipe Shield

Size Range: 1 ½” – 10”
Material: Carbon Steel
Finish: Galvanized Plating

Part # Size Packaged
1552-1.5 1 1/2” x 10” 25
1552-2 2” x 10” 25
1552-2.5 2 1/2” x 10” 25
1552-3 3” x 10” 25
1552-3.5 3 1/2” X 12” 25
1552-4 4” x 10” 25
1552-5 5” x 10” 25
1552-6 6” x 10” 25
1552-8 8” x 10” 25
1552-10 10” x 10” 25
Part # Size Packaged
1551-1.5 1 1/2” x 12” 25
1551-2 2” x 12” 25
1551-2.5 2 1/2” x 12” 25
1551-3 3” x 12” 25
1551-3.5 3 1/2” X 12” 25
1551-4 4” x 12” 25
1551-5 5” x 12” 25
1551-6 6” x 12” 25
1551-8 8” x 12” 25
1551-10 10” x 12” 25
Continue Reading

Wire Hooks

Posted on April 21, 2017 by warwickhanger - No Comments

Series 500 Plain Black Wire Hooks

Spec Sheet

Size Range: ½” – 1 1/4”
Material: Carbon Steel
Finish: Plain
Function: Used to black iron pipe from floor joists.

Our plain wire pipe hooks are manufactured out of 10 gage material. These hooks are made to hang black iron pipe from wooden rafters. The hook has nail points on each end to allow hook to be driven into the wooden rafters.

Part # Black Wire Hooks Package
500-2 1/2″ x 6″ 50
500-3 1/2″ x 8″ 50
500-4 1/2” x 10” 50
500-5 1/2” x 12” 50
500-7 3/4″ x 6″ 50
500-8 3/4″ x 8″ 50
500-9 3/4” x 10” 50
500-10 3/4” x 12” 50
500-12 1″ x 6″ 50
500-13 1″ x 8″ 50
500-14 1” x 10” 50
500-15 1” x 12” 50
500-16 1 1/4″ x 6″ 50
500-17 1 1/4″ x 8″ 50
500-18 1 1/4” x 10” 50

Series 525 Plastic Coated Black Wire Hooks

Size Range: ½” – 1 ¼
Material: Carbon Steel
Finish: Plain With Plastic Coating
Function: Used to hang black iron pipe from floor joist.

Our Plastic Coated Black Wire Hooks are manufactured out of 10 gage material. The hook has nail points on each end to allow hook to be driven into the floor joist.

Part # Black Wire Hooks Package
525-2 1/2″ x 6″ 50
525-3 1/2″ x 8″ 50
525-7 3/4″ x 6″ 50
525-8 3/4″ x 8″ 50
525-12 1″ x 6″ 50
525-13 1″ x 8″ 50
525-16 1 1/4″ x 6″ 50
525-17 1 1/4″ x 8″ 50

 

Series 550 Copper Plated Wire Hooks

Spec Sheet

Size Range: ½” – 1 ½”
Material: Carbon Steel
Finish: Copper Plating
Function: Used to hang copper tubing from floor joist.

Our copper plated wire hooks are manufactured out of 10 gage material. The hook has nail points on each end to allow hook to  be driven into the floor joist.

Manufactured in our Rhode Island facility.

Part # Copper Wire Hooks Packaged
550-2 1/2″ x 6″ 50
550-3 1/2″ x 8″ 50
550-4 1/2″ X 10″ 50
550-7 3/4″ x 6″ 50
550-8 3/4″ x 8″ 50
550-9 3/4” x 10” 50
550-10 3/4” x 12” 50
550-12 1″ x 6″ 50
550-13 1″ x 8″ 50
550-14 1” x 10” 50
550-15 1” x 12” 50
550-16 1 1/4″ x 6″ 50
550-17 1 1/4″ x 8″ 50
550-18 1 1/4” x 10” 50
550-19 1 1/4” x 12” 50
550-20 1 1/2” x 6” 50

 

Plastic Coated Copper Plated Wire Hooks

Size Range: ½ -1 ¼”
Material: Carbon Steel
Finish: Copper Plated With Plastic Coating
Function: Used to hang copper tubing from floor joist.

Our Plastic Coated Copper Plated Wire Hooks are manufactured out of 10 gage material. The hook has nail points on each end to allow hook to be driven into the wooden rafter.

Part # Copper Wire Hooks Package
575-2 1/2″ x 6″ 50
575-3 1/2″ x 8″ 50
575-7 3/4″ x 6″ 50
575-8 3/4″ x 8″ 50
575-12 1″ x 6″ 50
575-13 1″ x 8″ 50
575-16 1 1/4″ x 6″ 50
575-17 1 1/4″ x 8″ 50
Continue Reading

Spiral Vent & Z Vent Hangers

Posted on April 21, 2017 by warwickhanger - No Comments

Series 1001 & 1002 Spiral Vent & Z Vent Hangers

Size Range: 3” thru 6”
Material: Carbon Steel
Finish: Galvanized
Function: Designed for rapid installation of both ABS and PVC plastic Vent or Z Vent piping systems.

Our Spiral Vent and Z Vent Hangers have patented keyholes that allow for faster and easier installation which makes for a labor saving, more profitable job. Simply pre-screw or nail the floor joists where the length of pipe is to be installed, slip the hangers over the pipe, do not open the hanger. Lift the pipe by the hangers and slide the hanger over the screws that have been mounted into the floor joists.

Part # Size Finish Weight
1001-4 4” x 12” Spiral Vent Galvanized .49 Lbs
1001-5 5” x 12” Spiral Vent Galvanized .59 Lbs
1001-6 6” x 12” Spiral Vent Galvanized .73 Lbs
1002-3 3” x 12” Z Vent Galvanized .39 Lbs
1002-4 4” x 12” Z Vent Galvanized .285 Lbs
Continue Reading

Pro-Pitch Pipe Hanger

Posted on April 21, 2017 by warwickhanger - No Comments

Pro-Pitch Pipe Hanger

Size Range: Fits either 1 1/2″ – 2” DWV Pipe
Function:Used to install Attic Vent Pipes and DWV Pipes

Our patented Pro-Pitch Pipe Hanger has a simple and easy to use design.  It’s marked in 1/4″ increments to allow for easy adjustments.  The strength and rigidity of the Pro-Pitch Hanger make it perfect for Attic Vent Pipe or any DWV Pipe installation.  Makes it easy to set pipe at any pitch.

Download the PDF brochure.

Part # Size Type Packaged
4200-1 1 1/2″ – 2″ DWV 25
Continue Reading

J Hooks

Posted on April 21, 2017 by warwickhanger - No Comments

The Glide Lock J Hook

Size Range: 1 1/2″ – 4”
Function: Holds piping securely in both vertical and  horizontal applications

With the New Glide Lock J Hook the Warwick Hanger Company once again shows they’re on the cutting edge of innovation when it comes to the plumbing and pipe hanging industries. The Glide Lock J Hook was designed to make hanging PVC pipe easier and faster. It allows pipe to glide back and forth while it’s resting in the hanger to easily achieve your fit and gluing applications .Once your set up needs are accomplished our ratchet arm simply locks the pipe into place for a durable and sturdy installation. Versatility is a crowning achievement of the Glide Lock J Hook because our locking ratchet arm not only gives it the ability to lock pipe into place but also completely surrounds the pipe so it can be mounted in any position, horizontal, vertical or even upside down for unlimited flexibility. Available in sizes from 1&1/2” to 4” the Glide Lock J Hook is an indispensable resource for saving both time and money when hanging PVC pipe. See the video. Download the PDF brochure.

Patent #:  USD564, 866S

Part # Size Type Packaged
1425-1 1 1/2” x 7” DWV 25
1425-2 2” x 7” DWV 25
1425-3 3” x 7” DWV 25
1425-4 4” x 7” DWV 25

 

 

Series 1400 Plastic J Hook for DWV and CTS

Spec Sheet

Size Range: 1/2″ – 4”
Function: Holds piping securely in both vertical and  horizontal applications

The J-Hook is an exceptional hanger that saves time and money.  Hugs pipes snug and secure at easily determined grades.  Snap in lock feature holds pipe securely, glueable with same adhesive used for pipe fittings.

1/2″ – 4” hook fits both Sch 30 and Sch 40 pipe

Part # Size Type Packaged
1400-1 1 1/2” x 8” DWV 25
1400-2 2” x 8” DWV 25
1400-3 3” x 9” DWV 25
1400-4 4” x 9” DWV 25
1400-5 1/2” x 4” CTS 25
1400-6 3/4” x 4” CTS 25
1400-7 1” x 4” CTS 25
1400-8 1 1/4” x 4” CTS 25
1400-9 1/2” x 7” CTS 25
1400-10 3/4” x 7” CTS 25
1400-11 1” x 7” CTS 25
1400-12 1/2” x 1/2” x 4” CTS 25
1400-13 3/4” x 3/4” x 4” CTS 25

Continue Reading

DWV Hangers

Posted on April 21, 2017 by warwickhanger - No Comments

Series 1000 Galvanized DWV Hangers

Spec Sheet

Size Range: 1 1/2″ – 4”
Material: Carbon Steel
Finish: Galvanized Plating
Function: Designed for rapid installation of both ABS and PVC plastic DWV piping systems.

Our Galvanized DWV Hangers have patented keyholes that allow for faster and easier installation which makes for a labor saving, more profitable job. Simply pre screw or nail the floor joists where the length of pipe is to be installed, slip the hangers over the pipe, do not open the hanger. Lift the pipe by the hangers and slide the hanger over the screws that have been mounted into the floor joists.

Part Size Finish Weight Packaged
1000-1 1 1/2” x 12” Galvanized .21 Lbs 25
1000-2 2” x 12” Galvanized .29 Lbs 25
1000-3 3” x 12” Galvanized .39 Lbs 25
1000-4 4” x 12” Galvanized .47 Lbs 25
1000-1-24 1 1/2” x 24” Galvanized .32 Lbs 25
1000-2-24 2” x 24” Galvanized .39 Lbs 25
1000-3-24 3” x 24” Galvanized .51 Lbs 25
1000-4-24 4” x 24” Galvanized .61 Lbs 25
1000-1-36 1 1/2” x 36” Galvanized .42 Lbs 25
1000-2-36 2” x 36” Galvanized .54 Lbs 25
1000-3-36 3” x 36” Galvanized .62 Lbs 25
1000-4-36 4″ x 36” Galvanized .75 Lbs 25

 

Series IMP1000 Imported Galvanized DWV Hangers

Size Range: 1 1/2″ – 4”
Material: Carbon Steel
Finish: Galvanized Plating
Function: Designed for  installation of both ABS and PVC plastic DWV piping systems.

Our Galvanized DWV Hangers have patented keyholes that allow for faster and easier installation which makes for a labor saving, more profitable job. Simply pre screw or nail the floor joists where the length of pipe is to be installed, slip the hangers over the pipe, do not open the hanger. Lift the pipe by the hangers and slide the hanger over the screws that have been mounted into the floor joists.

Part Size Finish Weight
IMP1000-1 1 1/2” x 12” Galvanized .21 Lbs
IMP1000-2 2” x 12” Galvanized .29 Lbs
IMP1000-3 3” x 12” Galvanized .39 Lbs
IMP1000-4 4” x 12” Galvanized .47 Lbs

 

Series 1050 Galvanized DWV Hangers Heavy Material Width 1″

Spec Sheet

Size Range: 1 1/2″ – 4”
Material: Carbon Steel
Finish: Galvanized Plating
Function: Designed for rapid installation of both ABS and PVC plastic DWV piping systems.

Our Galvanized DWV Hangers have patented keyholes that allow for faster and easier installation which makes for a labor saving, more profitable job. Simply pre screw or nail the floor joists where the length of pipe is to be installed, slip the hangers over the pipe, do not open the hanger. Lift the pipe by the hangers and slide the hanger over the screws that have been mounted into the floor joists.

Part Size Finish Weight Packaged
1050-1 1 1/2” x 12” Galvanized 1.16 Lbs 25
1050-2 2” x 12” Galvanized 1.24 Lbs 25
1050-3 3” x 12” Galvanized 1.40 Lbs 25
1050-4 4” x 12” Galvanized 1.58 Lbs 25

 

Series 1100 Copper Plated DWV Hangers

Spec Sheet

Size Range: 1 1/2″ – 4”
Material: Carbon Steel
Finish: Copper Plating
Function: Designed for rapid installation of both ABS and PVC plastic DWV piping systems.

Our Copper Plated DWV Hangers have patented keyholes that allow for faster and easier installation which makes for a labor saving, more profitable job. Simply pre-screw or nail the floor joists where the length of pipe is to be installed, slip the hangers over the pipe, do not open the hanger. Lift the pipe by the hangers and slide the hanger over the screws that have been mounted into the floor joists.

Part Size Finish Weight Packaged
1100-1 1 1/2” x 12” Copper Plated .25 Lbs 25
1100-2 2” x 12” Copper Plated .35 Lbs 25
1100-3 3” x 12” Copper Plated .47 Lbs 25
1100-4 4″ x 12” Copper Plated .54 Lbs 25

 

Series 1300 Plastic Coated DWV Hangers

Spec Sheet

Size Range: 1 1/2″ – 4”
Material: Carbon Steel
Finish: Galvanized Plating
Function: Designed for rapid installation of both ABS and PVC plastic DWV piping systems.

Our Plastic Coated DWV Hangers have patented keyholes that allow for faster and easier installation which makes for a labor saving, more profitable job. Simply pre-screw or nail the floor joists where the length of pipe is to be installed, slip the hangers over the pipe, do not open the hanger. Lift the pipe by the hangers and slide the hanger over the screws that have been mounted into the floor joists.

Part Size Finish Weight Packaged
1300-1 1 1×2” x 12” Plastic Coated .25 Lbs 25
1300-2 2” x 12” Plastic Coated .35 Lbs 25
1300-3 3” x 12” Plastic Coated .45 Lbs 25
1300-4 4″ x 12” Plastic Coated .53 Lbs 25

 

Part Size Finish Weight Packaged
1300-1-24 1 1×2” x 12” Plastic Coated .34 Lbs 25
1300-2-24 2” x 12” Plastic Coated .41 Lbs 25
1300-3-24 3” x 12” Plastic Coated .53 Lbs 25
1300-4-24 4″ x 12” Plastic Coated .63 Lbs 25

 

Part Size Finish Weight Packaged
1300-1-36 1 1×2” x 12” Plastic Coated .44 Lbs 25
1300-2-36 2” x 12” Plastic Coated .56 Lbs 25
1300-3-36 3” x 12” Plastic Coated .64 Lbs 25
1300-4-36 4″ x 12” Plastic Coated .77 Lbs 25

 

Series IMP1300 Import Plastic Coated DWV Hangers

Size Range: 1 1/2″ – 4”
Material: Carbon Steel
Finish: Galvanized Plating
Function: Designed for installation of both ABS and PVC plastic DWV piping systems.

The  Plastic Coated DWV Hangers have patented keyholes that allow for faster and easier installation which makes for a labor saving, more profitable job. Simply pre-screw or nail the floor joists where the length of pipe is to be installed, slip the hangers over the pipe, do not open the hanger. Lift the pipe by the hangers and slide the hanger over the screws that have been mounted into the floor joists.

Part Size Finish Weight
IMP1300-1 1 1×2” x 12” Plastic Coated .24 Lbs
IMP1300-2 2” x 12” Plastic Coated .35 Lbs
IMP1300-3 3” x 12” Plastic Coated .45 Lbs
IMP1300-4 4″ x 12” Plastic Coated .53 Lbs

 

Series 1350 Plastic Coated DWV Hangers Material Width 1″

Spec Sheet

Size Range: 1 1/2″ – 4”
Material: Carbon Steel
Finish: Galvanized Plating
Function: Designed for rapid installation of both ABS and PVC plastic DWV piping systems.

Our Plastic Coated DWV Hangers have patented keyholes that allow for faster and easier installation which makes for a labor saving, more profitable job. Simply pre-screw or nail the floor joists where the length of pipe is to be installed, slip the hangers over the pipe, do not open the hanger. Lift the pipe by the hangers and slide the hanger over the screws that have been mounted into the floor joists.

Part Size Finish Weight Packaged
1350-1 1 1×2” x 12” Plastic Coated 1.86 Lbs 25
1350-2 2” x 12” Plastic Coated 1.94 Lbs 25
1350-3 3” x 12” Plastic Coated 2.18 Lbs 25
1350-4 4″ x 12” Plastic Coated 2.40 Lbs 25
Continue Reading

Perforated Hanger Strapping

Posted on April 21, 2017 by warwickhanger - No Comments

Perforated Hanger Strapping

Spec Sheet

Size Range: 10, 50, 100 Foot Coils
Material: Carbon Steel
Finish: Plain, Copper, Galvanized, Plastic
Function: Used to hang insulated flexible duct, round pipe or rectangular duct. This helps prevent the duct system from sagging over long runs.

Part # Finish Coil Size Weight Packaged
3000-10 Galvanized 10 Ft .79 Lbs 20
3000-50 Galvanized 50 Ft 4.44 Lbs 1
3000-100 Galvanized 100 Ft 8.60 Lbs 1
3100-10 Copper Plated 10 Ft .92 Lbs 20
3100-50 Copper Plated 50 Ft 4.90 Lbs 1
3100-100 Copper Plated 100 Ft 9.20 Lbs 1
3500-10 Plain Steel 10 Ft .79 Lbs 20
3500-50 Plain Steel 50 Ft 4.44 Lbs 1
3500-100 Plain Steel 100 Ft 8.60 Lbs 1
With Keyholes With Keyholes
3000-10K Galvanized 10 Ft .79 Lbs 20
3000-50K Galvanized 50 Ft 4.44 Lbs 1
3000-100K Galvanized 100 Ft 8.60 Lbs 1
3100-10K Copper Plated 10 Ft .92 Lbs 20
3100-50K Copper Plated 50 Ft 4.90 Lbs 1
3100-100K Copper Plated 100 Ft 9.20 Lbs 1
3500-10K Plain Steel 10 Ft .79 Lbs 20
3500-50K Plain Steel 50 Ft 4.44 Lbs 1
3500-100K Plain Steel 100 Ft 8.60 Lbs 1
3700-10 Plastic 10 Ft .095 Lbs 1
3700-50 Plastic 50 Ft .63 1
3700-100 Plastic 100 Ft 1.265 1
Continue Reading

Tube Support Bracket

Posted on April 21, 2017 by warwickhanger - No Comments

Series 800 Tube Support Bracket

Spec Sheet

Size Range: 1/2″ 3/4″ 1″
Material: Carbon Steel
Finish: Copper Plated
Function: Designed to position stub outs for all types of fixtures. Our keyhole slot adds alignment flexibility

Part # Size Accepts
800-50 Tube Bracket Narrow 1/2” Tubing
800-51 Tube Bracket Wide 1/2″, 3/4″ & 1” Tubing
Continue Reading
  • 1
  • 2
  • Next →

Warwick Hanger

Warwick Hanger Company
34 Canal Street
Westerly, RI, 02891
Get Directions

Contact Information

Phone: 401-596-8062
Fax: 401-596-8063
Contact Us

Hours of Operation

Mon - Thur: 7:00am - 4:30pm
Friday: 8:00am - 12:00pm
Sat - Sun - Closed

Catalog

Pipe Hangers
Hardware Fasteners
Protective Plates
Strut

Copyright © 2023 Warwick Hanger. All Rights Reserved. Symphony Pro by Slocum Studio