Series 2121 Power Bolt
Size Range: 2 1/4” & 3”
Material: Carbon Steel
The Power-Bolt anchor, formerly known as the Rawl-Bolt, is a heavy duty sleeve style, selflocking anchor which is vibration resistant and removable. It is available with a finished hex head or flat head with a hex key insert and can be used in concrete, block, brick, or stone. Expansion occurs at two locations within the drilled hole. First, the cone is pulled into the large triple-tined expansion sleeve, developing a mid-level, compression force. Further turning causes the threaded bolt to advance into the threads of the expander cone, forcing its four sections outward. This action undercuts the base material deep in the anchor hole, greatly increasing the holding power of the Power-Bolt. The bolt and cone remain locked together which prevents loosening under even the most severe vibratory conditions. The Power-Bolt is also designed to draw the fixture into full bearing against the base material through the action of its flexible compression ring. As the anchor is being tightened, the compression ring will crush if necessary to tightly secure the fixture against the face of the base material.
|Part #||Size||Packaged||Case Quantity|
|2121-H||3/8” X 2 1/4”||25||N/A|
|2121-J||3/8” X 3”||25||N/A|